Campus Network

The University of Hartford has fiber optic cabling, wiring, and telecommunications equipment to all of the student residences on the main campus. Students have their own high speed Ethernet connection to the Campus Network and the Internet via 10 base T (twisted pair) jacks in their rooms. This provides 100 megabit per second (Mbs) twisted-pair Ethernet for each PC or Macintosh connected. All residence halls are also equipped with wireless connectivity. A WiFi signal should be available in all areas of your suite or bedroom, and in most laundry rooms and meeting rooms, and some areas outside of the buildings.

Our network is designed to work with both Windows and Macintosh computers. While the University of Hartford makes no brand preference for students when purchasing a new computer, we do have some guidelines for performance to ensure suitable compatibility with our Ethernet network in the Residences.

Wireless Network

The University's wireless system supports two methods of connecting: Wi-Fi Protected Access (WPA), and Wired Equivalent Privacy (WEP). Information Technology Services recommends that you use WPA, and only use WEP if your device does not support WPA, or if you do not want your computer or device to permanently store your University password.

Where to get help—Need help connecting to the wireless network? Call the ITS Computer Support Line at 860.768.5999 or bring your computer or device to the Computer Support Center in CC113.

Connecting via WEP

UHDEVICES:

  • Works with more computers and operating systems than WPA.
  • Your computer or device does not store your University password.
  • Must start a web browser each time you start up (or resume) your computer or device in order to log on to the network via an authentication web page.

(if your computer cannot connect to hawknet)
 Only use the following directions for devices such as game consoles and older computers.

If it is a device that does not do web authentication, you will need to register the device. Registering a Game Console or Streaming Player on WiFi

You'll need the following settings in order to configure your wireless computer to connect to the University network via WEP. (Some operating systems and/or network card drivers may not ask some of the following.):

  • SSID: uhdevices (must be typed in all lowercase letters!)
  • Password: Hartfordhawks

Look for and select the network on your computer or device named "uhartford."

The computer or device may then ask for a network password, often called a "security key" The University's key for the uhdevices network (which is the same everywhere on campus) is Hartfordhawks. It's a long password, but easy to remember and type -- notice that it's just Hartford hawks with no space and the first letter capitalized. Most computers and devices will remember this password forever once you type it in, so you shouldn't need to memorize it.

Once your network card "associates" itself with the network, start your web browser, if on a device you did not register. You will automatically be directed to the Network Authentication System where you must enter your University of Hartford email name (only -- without the "@hartford.edu" part), and your email password. Your web browser will then automatically continue to its usual home page, and your device is now connected to the campus wide network, and the Internet. You will have to start a web browser and log in each time you turn on your device.

Registering a Game Console or Streaming Player on WiFi

Devices, such as game consoles (Playstation, Xbox, Wii) and video streaming players (Apple TV, Roku, Blu-ray players, Smart TVs) are not designed to work in an enterprise-class, high density, authenticated WiFi environment such as that in a University.

These devices are best connected to the University network via a wired connection for best gameplay and best video streaming performance. Information Technology Services recommends that you connect such devices to the wired network via an Ethernet cable. However, they can be connected to the University’s WiFi network by “registering” them to use a lower-security (less powerful encryption) that the device can support, and by “storing” your network credentials for the device in the WiFi system. Registration is accomplished by entering a unique “fingerprint” (called a “Media Control Access” or “MAC” address) on your device into the WiFi system and associating it with your University network account. Every networkable device has a unique MAC address.

Follow the Registering a Game Console or Streaming Player on WiFi guide to register your device to the University’s WiFi network.

Limitations

There are limitations to how you can use the "airspace" on campus and some devices will not work in an authenticated system such as the University's.

You may not operate your own wireless network on campus

  • You must not operate your own wireless network "access point" devices at the University of Hartford. These devices will interfere with the University's wireless signal and deprive others access to the network. These are considered "Unauthorized devices" which "...interfere... with the activities of others..." under the University's Responsible Technology Use Policy. Unauthorized devices are referred to as "rogue access points." An "access point" device is any item that acts as a "wireless infrastructure" device.

Computer Policies

These devices include:

  • Wireless routers (such as Linksys, Netgear, Belkin, Apple Airport)
  • Wireless disk drives (such as Maxtor Central Axis, Apple Time Capsule)
  • MiFi "hot spots" (such as offered by Sprint, Verizon)
  • Cell phones operating as "hot spots" (such as Android™, iPhone)

You may only operate wireless "client" devices on the University campus. Such devices include laptop and desktop computers with WiFi, smartphones that can connect to WiFi networks, tablets such a Apple iPad, Kindle Fire, and most Androids.

  • Some devices cannot connect to a WPA-2 Enterprise network such as HawkNet. You can try connecting them to the University's WEP network as described in "Connecting via WEP."

Why can't I install my own wireless network?

Crowded airspace: 
To provide a robust and reliable signal to all residents, over 1,000 access points within a small confined area.

To ensure maximum network performance of (speed, signal strength, and reliability), these radios operate on one of three non-overlapping channels (WiFi channels 1, 6, and 11), and are all tuned to maximize signal strength in all locations while not interfering with each other. When two radios are on the same channel (or within 4 channels of each other) and are too close to each other, their signals interfere with each other, causing connected computers to communicate slowly within a network.

The University network was designed, and is continuously monitored to maintain the maximum performance and reliability possible for the thousands of people using it. Introducing a new ("rogue") access point into the system damages the balance of the system. While you might be able to connect to your rogue device, it would "pollute" the airwaves for up to two hundred feet in all directions above, below, and around it, denying others access to the University network.

A self-defending system: The Residential Wireless Network Systems is self defending. It continuously monitors the airwaves for "rogue" devices, triangulates their physical locations, and then "attacks" them in an attempt to render them unusable.

University Code of Conduct
: Anyone found operating a device acting as an access point will be charged under the University Code of Conduct, as doing so negatively impacts other residents. Penalties may include housing selection ineligibility.