Supervision of Graduate Students
Utility NavTop NavContentLeft NavSite SearchSite SearchSite Search

Supervision of Graduate Students

Ageel Abdullah, (2012), ‘Transistor Heat Sink Design.’ (in progress)

Aneela Naz, (2012), ‘Pin Fin Heat Sink Design Trade-offs.’ (in progress)

Harini Patlolla, (2012), ‘Early Stage Melt Ejection in Laser Percussion Drilling.’ (in progress)

Eppes, T. A., Milanovic, I., & Patlolla, H., (2012) ‘Early Stage Melt Ejection in Laser Percussion Drilling,’ 2012 COMSOL Conference, Boston, MA.

Ram Thiruvengadam, (2012), ‘Unmanned Aerial Vehicle Patch Antenna.’

Eppes, T., Milanovic, I., & Thiruvengadam, S., (2011), ‘Model for an Unmanned Aerial Vehicle Patch Antenna.’ (in progress)

Eppes, T., Milanovic, I., & Dipanfilo M., (2012), ‘Resonance Modes in an Acoustic Guitar,’ Euro-Amer. Arts & Sci. Conf., Aix en Provence, FR.

Eppes, T., Milanovic, I., & Thiruvengadam, S., (2011), ‘Patch Antenna Model for Unmanned Aerial Vehicle,’ Proc. COMSOL Conf., Newton, MA.

Swapna Chennapolla, ‘Multiphysics Model for Laser Percussion Drilling,’ 2011.

Chennapolla, S. & Eppes, T. A., (2011), ‘Multiphysics Model of Laser Percussion Drilling,’ Proc. Am. Soc. Eng. Educ. Conf. -Northeast Section, W. Hartford, CT.

Murrillo, E. & Eppes, T. A., (2011), ‘Embedded Temperature and Voltage Monitoring System,’ Proc. Am. Soc. Eng. Educ. Conf. -Northeast Section, W. Hartford, CT.

Eppes, T. A. & Murillo, E., (2011), ‘Voltage and Temperature Monitoring for Videoscope,’ Intl. J. Appl. Eng. Res., 6(16), pp. 1889-95.

Rakesh Sarma, (2011), ‘Optical Character Recognition Using Single Value Decomposition,’ Sponsor: Pitney-Bowes, Inc.

Deepthi Teegala, (2009), ‘Optical Character Recognition Algorithm,’ Sponsor: Pitney-Bowes, Inc.

Vaseem Syed, (2008), ‘Development and Automation of a Manipulator for a 3-D Steinbichler Scanner,’ Sponsor: Bolton Works.

Angelie Ng, (2008), ‘System Design of a Charge-couple Device Video Camera,’ Sponsor: Instrument Technology, Inc.

Edinson Murillo, (2008), ‘Embedded Temperature and Battery Voltage Monitoring System for a Charged-coupled Device Videoscope,’ Sponsor: Instrument Technology, Inc.

Eppes, T.A., Milanovic, I.M., Shetty, D., & Bouffard, A., (2008), ‘Modeling Utility for Percussion Laser Drilling - Experiment Vs. Theory,’ Proc. PICALO Conf., Beijing, CN.

Eppes, T.A., Milanovic, I.M., Shetty, D., & Bouffard, A., (2008), DREAM Beta Release CD.

Rajesh Karki, (2008), ‘Analysis & Design of a Small Electrical Power Grid with Load Extension.’

Robert Greger, (2008), ‘Embedded XML Evaluation Project,’ Sponsored by Pitney-Bowes, Inc.

Gowtam Yarlagadda, (2007), ‘User Interface Design for a CCD Videoscope System,’ Sponsor: Instrument Technology, Inc.

Jason Bornas, (2007), ‘Laser Percussion Drilling Estimation & Modeling,’ Sponsor: CCAT & CETA Graduate Assistantship.

Eppes, T.A., Milanovic, I.M., Shetty, D., & Bornas, J., (2007), DREAM Alpha Release CD.

Bornas, Jason, ‘Laser Percussion Hole Drilling: Modeling & Simulation,’ Graduate Research/Creativity Symposium.

Eppes, T., Milanovic, I., Shetty, D., & Bornas, J., (2007). ‘Enhanced Percussion Laser Drilling Utility,’ Proc. ICALEO Conf., Orlando, FL.

Srinivasa Jayanthi, (2007), ‘Embedded Database Evaluation Project,’ Sponsor: Pitney- Bowes, Inc.

Vasanth Sandepudi, (2007), ‘Re-usable Software Components,’ Sponsor: Pitney-Bowes, Inc.

Eppes, T., Milanovic, I., Shetty, D., & Bornas, J., (2006), ‘Drilling Routine for Estimating, Analyzing, & Modeling of Laser Processing,’ Proc. ICALEO Conf., Scottsdale, AZ.