Project Supervision | Graduate Students
Utility NavTop NavContentLeft NavSite SearchSite SearchSite Search

Project Supervision | Graduate Students

Brzostowski, Karen, Calibration, Examination of Temperature Measurement Capability of a Platinum Resistance Temperature Probe.


Giovanini, Samuel, ‘Validation of a Preliminary Design for a Tangential Onboard Injection System Using Computational Fluid Dynamics,’ 2015-2016.


Lara, Jose, ‘Flow Separation in a Linear Array of Turbine Blades,’ Presented at Graduate Research/Creativity Symposium, Spring 2015.


Mohammed, Mohsinmahmood, ‘Modeling of Nitrogen Cooling Tube in Optical Fiber Drawing Furnace,’ Sponsored by OFS, 2014-present.


Eppes, T. A., Milanovic, I., and DiPanfilo, M. (2014). Coil-based Microphone Modeling and Analysis, Proceedings of Euro-Amer. Conf. J. Arts & Sci.


Eppes, T. A., Milanovic, I., & Malik, S. (2013). Vibrational Response of a Gong. Int. J. Arts Sci., 6 (3), 199-212.


Fahad Khan, Ph.D. Committee Member, WPI, 2013-present.


Lara, Jose, ‘Secondary Flows in Turbine Blades,’ 2013-present


Banks, Anton, ‘Examination of the Effect of Flow Turning on the Development of Secondary Flows in Turbine Blades,’ Sponsored by Pratt & Whitney, 2013-2014


Kucinskas, Keith, ‘Characterization of Water Table Facility,’ 2012-10/2013

  • Regents Honor Award for Graduate Students AY 2013-2014

Alabdulla, Ageel, ‘Thermal Modeling of Transistor Heat Sink Cooled by Forced Convection,’ 2012-10/2013


Stearns, Michelle, ‘Analysis of air exiting a curved duct impinging on a rotating annulus,’ Sponsored by Pratt & Whitney, 2012-10/2013


Nelson, Alexander, ‘Study of Forward Facing Step in Water Table Facility,’ 2012-05/2013


Eppes, T. A., Milanovic, I., & Patlolla, H., (2012) ‘Early Stage Melt Ejection in Laser Percussion Drilling,’ 2012 COMSOL Conference, Boston, MA.


Whitmore, Ryan, ‘Predicting and Modeling of Ball Valve Behavior,’ Sponsored by Belimo Technology, 09/2010-05/2012.


Eppes, T., Milanovic, I., & Dipanfilo M., (2012), ‘Resonance Modes in an Acoustic Guitar,’ Euro-Amer. Arts & Sci. Conf., Aix en Provence, FR.


Dautova, L. S., Experimentally Validated CFD Model of a Turbulent Jet Stirred Tank. Presented at Graduate Research/Creativity Symposium, Spring 2012.


Dautova, L. S., Milanovic, I., & Hammad, K. J. (2012). Experimentally Validated CFD Model of a Turbulent Jet Stirred Tank. In M. Kshirsagar, B. Patil, U. Gawande, L. Manzione, D. Shetty, & T. Eppes (Eds.),  Proceedings ofInternational Conference on Innovation and Trends in Applied Computing. (pp. 7-13).Nagpur, Maharashtra, India.


Dautova, Luytsia, ‘Mixing in Jet Stirred Tanks,’ 09/2010-12/2011.


Khan, F., Milanovic, I., & Hammad, K. (2011). CFD Modeling of Submerged Impinging Jets with Various Separation Distances. Proceedings of ASEE-NE Section Annual Conference. West Hartford, CT.


Eppes, T., Milanovic, I., & Thiruvengadam, S., (2011), ‘Patch Antenna Model for Unmanned Aerial Vehicle,’ Proc. COMSOL Conf., Newton, MA.


Khan, Fahad, ‘CFD Modeling of Submerged Impinging Jets with Various Separation Distances,’ Sponsored by The Saudi Arabia Cultural Mission and CETA Graduate Assistantship, 09/2009-12/2010.


Khan, Fahad, ‘Numerical Study of Submerged Impinging Jets,’ Presented at Graduate Research/Creativity Symposium, Spring 2010.


Parikh, Ajal, ‘Flow Structure of Submerged Impinging Jet,’ Sponsored by CETA Graduate Assistantship, 09/2009-12/2010


Eppes, T. A., Milanovic, I. M., Shetty, D., & Bouffard A. (2008). Modeling Utility for Percussion Laser Drilling – Experiment vs. Theory. Proceedings of 3rd Pacific International Conference on Application of Lasers and Optics. Paper 1373.


Eppes, T. A., Milanovic, I. M., Shetty, D., & Bouffard, A. (2008). DREAM Beta release CD.


Bornas, Jason, ‘Laser Percussion Hole Drilling: Modeling and Simulation,’ Sponsored by CCAT and CETA Graduate Assistantship, 2007.


Bornas, Jason, ‘Laser Percussion Hole Drilling: Modeling & Simulation,’ Presented at Graduate Research/Creativity Symposium, Spring 2007.


Eppes, T. A., Milanovic, I. M., Shetty, D., & Bornas, J. (2007). Enhanced Percussion Laser Drilling Modeling Utility. Proceedings of ICALEO Conference. Paper ICALEO-2007-1204.


Eppes, T. A., Milanovic, I. M., Shetty, D., & Bornas, J. (2007). DREAM Alpha release CD.


Eppes, T. A., Milanovic, I. M., Shetty, D., & Bornas, J. (2006). Drilling Routine for Estimating, Analyzing and Modeling of Laser Processing. Proceedings of 2006 ICALEO Conference. Paper ICALEO-2006-309.


Undergraduate Students