Project Supervision | Undergraduate Students
Utility NavTop NavContentLeft NavSite SearchSite SearchSite Search

Project Supervision | Undergraduate Students

Mauricio, Christian, ‘Vortical Flows over Open Cavities,’ Sponsored by CETA FACULTY/STUDENT RESEARCH GRANT 2017. Presented at UNDERGRADUATE RESEARCH & CREATIVITY COLLOQUIUM, Spring 2017.


Huelsman, Sara ‘Noise Levels of HVAC Diffusers,’ Presented at UNDERGRADUATE RESEARCH & CREATIVITY COLLOQUIUM, Spring 2017.


Huelsman, Sara ‘Noise Levels of HVAC Diffusers,’ UNDERGRADUATE HONORS THESIS, Spring 2017


Markiewicz, Mark, Starr, Justin, Sabino, Gianna, Behnke, Sean, Mcgillivary, Zachary, Paterson, Alexander, Simke, Justin, & Reynolds, Jason, ‘Wind-Tunnel Development,’ Sponsored by CETA Faculty/Student Research Grant & Board of Visitors Donation. Presented at Undergraduate Research & Creativity Colloquium, Spring 2016.


Starr, Justin, ‘Visualization of Secondary Flows in Linear Array of Turbine Blades,’ Sponsored by CETA Faculty/Student Research Grant, Spring 2015. Presented at Undergraduate Research & Creativity Colloquium, Spring 2016.


Alabdulgader, Mohammed, Drakes, David, Markiewicz, Mark, & Starr, Justin, ‘Developing Turbomachinery Research Laboratory,’ Sponsored by Connecticut Space Grant: Faculty Research. Presented at Undergraduate Research & Creativity Colloquium, Spring 2015.


Johnson, Tanya, ‘The Sound of Vortex Shedding,’ Sponsored by WFund: Dorothy Goodwin Scholar, Presented at Dorothy Goodwin Luncheon, Spring 2015.


Brzostowski, Karen, ‘Biometric Simulation Study in Support of MAV Development,’ Sponsored by CT SG Undergraduate Research Fellowship. Presented for Undergraduate Research/Creativity Symposium, Spring 2014.


Galica, Jonathan, Hardy, Dylan, Knecht, Jeffrey, McCall, Ryan, ‘Transient Simulation of Hot Oil System,’ ME Capstone Design Project, Sponsored by Pratt & Whitney, Fall 2013


Coutermarsh, Nathan, Keller, Ashley,  Quadrato, Dillon, ‘Butterfly Valve Study,’ ME Capstone Design Project, Sponsored by Belimo, Fall 2013


Arena, David, Brzostowski, Karen, Quitzau, Eric, ‘Preform Spinning Spindle,’ ME Capstone Design Project, Sponsored by Optical Fiber Solutions, Fall 2013


Stevenson, Carl, ‘Pitch Plunge Airfoil,’ Summer 2013


Alkhaldoun, Hala, ‘Impinging Jet,’ Presented at Undergraduate Research/Creativity Symposium, Spring 2013.


Brzostowski, Karen, ‘Characterization of an Unmanned Aerial Vehicle Wing Design,’ Presented at Undergraduate Research/Creativity Symposium, Spring 2013.


Jolles, Jason, ‘Pitch Plunge Movement,’ Sponsored by CETA Faculty/Student Research Grant, Summer 2012.


Kelly, Myles, Prekulaj, Ernest, & Julius Woods, ‘Evaluation of Thread Lubricants,’ MET Senior Design Project, Sponsored by Hamilton Sundstrand, Spring 2012.


Graul, Todd, Hernandez, Nicole, & Pilke, Daniel, ‘Design and Construction of a Ukulele Mounting Device for a Microwave Oven,’ MET Senior Design Project, Sponsored by Virginia Tech, Spring 2012.


Eppes, T., Milanovic, I., & Quarshie, G., (2012), ‘Finite Element Modeling of a Transistor Heat Sink,’ Am. J. Eng. Tech. Res., 12(1), pp. 69-77.


Brunner, Christopher, & Moses, Gabriel, ‘Steady Counter-Rotating Vortex Pair in Jets in Cross-Flow,’ Sponsored by CT SG, Fall 2011. Presented at Undergraduate Research/Creativity Symposium, Spring 2012.


Becerra, Annie Stephanie, & Daily, Jenna, ‘Coherent Structures in Jets in Cross-Flow,’ Sponsored by WELFund, AY 2011-2012. Presented at Undergraduate Research/Creativity Symposium, Spring 2012.


Eppes, T. A., Milanovic, I., Shetty, D., & Daly, J. (2012). Characterization of an Unmanned Aerial Vehicle Wing Design. In M. Kshirsagar, B. Patil, U. Gawande, L. Manzione, D. Shetty, & T. Eppes (Eds.), Proceedings ofInternational Conference on Innovation and Trends in Applied Computing. (pp. 3-6).Nagpur, Maharashtra, India.


Daily, Jenna, ’60 mm Hybrid Projectiles (UAV),’ Sponsored by Armament Research, Development, and Engineering Center (ARDEC), Fall 2011.


Eppes, T., Milanovic, I., & Quarshie, G., (2011), ‘Power Transistor Heat Sink Design Trade-offs,’ Proc. COMSOL Conf., Newton, MA.


Daily, Jenna, ‘Jets in a Cross-Flow,’ Sponsored by Dorothy Goodwin Summer Research Scholar Program, Summer 2011.


Lore, Raymond, Plunkett, Julian, Sperrazza, Anthony, & Woodley, Derone, ‘Life Estimation of Elastomeric Diaphragms,’ MET Senior Design Project, Sponsored by Hamilton Sundstrand, Spring 2011.


DiPreta, Christopher, Sekas, Paul, & Zeleznicky, Laura, ‘Design and Construction of a Microwave Conveyor Belt,’ MET Senior Design Project, Sponsored by Virginia Tech, Spring 2011.


Brink, Peter, Cowley, Neil, Pelini Robert, & Smith, Corey, ‘Design and Implementation of Pleat Height Measurement System for Filter Industry, MET Senior Design Project, Sponsored by 3M Purification Corporation, Spring 2011.


Belmonte, Joseph, Brown, Aaron R., and Lewis, Maxwell, ‘Tube Cutting Apparatus,’ MET Senior Design Project, Sponsored by Westinghouse, Spring 2009.


Fitzgerald, Chris, Herr, Joey, Morosko, Stephen, & Sarnowitz, David, ‘Compression Set Performance,’ MET Senior Design Project, Sponsored by Hamilton Sundstrand, Spring 2009.


Becker, Mike, Iervolino, Tonny, & Tolhurst, George, ‘Pin on Disc Tribometer,’ MET Senior Design Project, Sponsored by Pratt & Whitney, Spring 2009.


Perritano, Leo, ‘United Technology Building - LEED Certification Plan and Infrastructure Systems Upgrade,’ MET Senior Design Project, Sponsored by Carrier, Fall 2008.


Choy, Kevin, Foote, Byron, Patel, Neil, & Wax, Alan, ‘Evaluation of Corrosion Preventative Compounds,’ MET Senior Design Project, Sponsored by Hamilton Sundstrand, Spring 2008.


Freitag, Doug, Johnston, Brian, Peart, Dwayne, & Schoolnik, Cody, ‘Diaphragm Pressurization Test,’ MET Senior Design Project, Sponsored by Hamilton Sundstrand, Spring 2008.


Calderone, Jillian, Damm, Jason, Desilets, Brad, & Johnson, David, ‘Coating Qualification Testing,’ MET Senior Design Project, Sponsored by Hamilton Sundstrand, Spring 2008.


Graillat, Cliff, ‘Nickel Alloy Welding Wire,’ MET Senior Design Project, Sponsored by Pratt & Whitney, Spring 2008.


Krupa, Mike, Magner, Daryl, & Romeo, Eric, ‘Turntable Assembly,’ MET Senior Design Project, Sponsored by Gems Sensors, Spring 2007.


Joseph, Mitchell, Whitmore, Ryan, & Tyson, Brandon, ‘Automated Pressure Test System,’ MET Senior Design Project, Sponsored by Gems Sensors, Spring 2007.


Durkee, Christopher, ‘Vibration Rig,’ MET Senior Design Project, Sponsored by Pratt & Whitney, Spring 2006.


Armata, Pawel, ‘Parametric Control Structure File for Gas Turbine Engine,’ MET Senior Design Project, Sponsored by Pratt & Whitney, Spring 2006.


Gage, Jeremy & Mezzo, John, ‘Filter Screen Pressure Drop,’ MET Senior Design Project, Sponsored by Hamilton Sundstrand, Spring 2006.


Aliche, Carol & Hankerson, Lenora, Exploration of Hamilton Sundstrand Clamps, MET Senior Design Project, Sponsored by Hamilton Sundstrand, Spring 2006.


Cecala, Christopher & Larson, Michael, ‘Exploration of Axial, Torsional and Bending stiffness of Flexhoses,’ MET Senior Design Project, Sponsored by Hamilton Sundstrand, Spring 2006.


Meczywor, Michael, ‘Custom Work Holding Solution Integrated to a CNC Lathe,’ MET Senior Design Project, Sponsored by Kamatics Corp., Fall 2005.


Casey, Neil, Klitsch, James, Larson, Michel, Lorentzen, Keith, & Mezzo, John, ‘Capturing the Historical Trend of Streamlining Cars in the University of Hartford Wind Tunnel,’ Presented at Undergraduate Research/Creativity Symposium, Spring 2005.


Klitsch, James, & Lorentzen, Keith, ‘Automated Frisbee Throwing Machine,’ MET Senior Design Project, Presented at Undergraduate Research/Creativity Symposium, Spring 2005.


Burnickas, Michael, ‘Embraer: Secondary Power Distribution Assembly,’ MET Senior Design Project, Sponsored by Hamilton Sundstrand, Fall 2004.


Voelm, Eric, Read, Mark, Rivera, Jim, Graillat, Cliff, & Meczywor, M., ‘Design of an Experiment: Flow Past a Golf Ball,’ Presented at Undergraduate Research/Creativity Symposium, Spring 2004.


Sederholt, Adam, Randazzo, Salvatore, Couture, Steven, Read, Mark, Voellm, Eric, & Salamat, Mohammad, ‘Mine Retrieving Robot,’ MET Senior Design Project, Presented at Undergraduate Research/Creativity Symposium, Spring 2004.


Krystal DiMatteo, Synthetic Jet, MET Senior Design Project, Spring 2004


Poticny, Michael, Synthetic Jet Senior Design Project, Fall 2003


Corthell, Adam, Cruz, Daniel, Kintzi, Marty, Magginelli Domenic, McKelvin, David, C., & Pelini, Mark, ‘Hovercraft Design and Test,’ MET Senior Design Project, Presented at Undergraduate Research/Creativity Symposium, Spring 2003.


McKelvin, David, C., ‘Study of Delta Wings,’ Presented at Undergraduate Research/Creativity Symposium, Spring 2003.


Graduate Students